Home › Guides › Epoxy flooring business › Prep & moisture

Epoxy Floor Prep and Moisture Testing: Avoid Failed Floors

By , editor · Updated

Peeling, bubbling and hot-tire pickup almost always come back to prep or moisture. Getting these right is what separates pros from DIY kits.

Key takeaways
  • Grind the concrete; don't rely on acid etching alone
  • Test slab moisture before coating
  • Follow the product's data sheet limits
  • Repair cracks before the base coat

Surface prep

Moisture testing

Moisture coming up through the slab is a leading cause of coating failure. Two common test methods are:

TestWhat it measuresNotes
ASTM F1869 (calcium chloride)Moisture vapor emission rate at the surfaceRun on bare, prepped concrete, not over old coatings
ASTM F2170 (relative humidity probes)Relative humidity inside the slabProbes sit in drilled holes and need time to stabilize

There's no single universal limit: the coating manufacturer's data sheet sets the acceptable moisture levels. If a slab tests high, use the moisture-mitigating primer the manufacturer specifies or don't coat it.

Follow the label

Mixing ratios, temperature and humidity limits, pot life and recoat windows all come from the product data sheet. Write them on your job checklist.

See the full step-by-step guide to starting a epoxy flooring business.

Frequently asked questions

Why does epoxy peel off garage floors?

Most often because the concrete wasn't ground and cleaned properly, moisture came up through the slab, or the product's mixing, temperature or recoat instructions weren't followed.

Is acid etching enough prep for epoxy?

Many pros prefer diamond grinding because it removes contamination and creates a consistent profile. Check what your coating manufacturer requires for its warranty.

Free printable: Epoxy Flooring Business Startup Checklist

Every step in this guide on a 2-page PDF you can print and tick off.

Download PDF
Starting a epoxy flooring business? Follow our complete step-by-step guide: niche, registration, insurance, equipment, pricing, website and first clients.

General information, not legal, tax or insurance advice. Requirements vary by state and city.